VCO for RF purposes comparable to digital radios, SATCOM and base stations launched by Crystek

FORT MYERS, Florida – Crystek Corp. in Fort Myers, Florida, introduces the CVCO55CC-3950-3950 (VCO) voltage controlled oscillator for RF and microwave applications such as digital radios, wireless landline access, satellite communications (SATCOM). Systems and base stations.

The HF and microwave device operates at 3950 MHz with a control voltage range of 0.5 to 4.5 volts. This VCO has a typical phase noise of -111 dBc / Hz with an offset of 10 kHz and has excellent linearity. The output power is typically 4.5 dBm.

Developed and manufactured in the USA, the CVCO55CC-3950-3950 is packaged in an industry-standard 0.5 x 0.5 inch SMD package and is intended for digital radios, wireless landline access, satellite communications systems (SATCOM), and base stations.

The input voltage is 5 volts with a maximum current consumption of 36 milliamperes. Pulling and pushing are minimized to 1 MHz peak-to-peak and 1 MHz per volt, respectively. The suppression of the second harmonic is typical for -20 dBc.

Contact Crystek Corp. for more information. online at www.crystek.com.

Comments are closed.